MP1.5B.5B Mega-Coupler Pipe Adapter 1.5 Pipe Blk
ALL BULBS will beat “ALL” competitors pricing! ……. Call 516.766.2266
MP1.5B.5B Mega-Coupler Pipe Adapter 1.5 Pipe Blk Standard Aluminum Grid Pipe
The Pipe to Coupler Adapter can be used to rig pipe-mounted plasma screens, projectors and speakers from overhead pipe or truss. Special versions are available with cable holes through the side to run power and signal cables inside the vertical pipe. The Pipe to Coupler Adapter attaches a standard threaded NPT 1-1/2″ pipe (1.9″ OD) to a Mega-Coupler. There are two interlocking tabs to keep the adapter from rotating. The Adapter is fastened to the Mega-Coupler with a 1/2″-13 tpi by 1″ long bolt and a jam nut (not included). There is a 1/4-20 set screw to lock the pipe rotation, and an inspection hole to verify that the pipe is fully inserted.
The Mega-Coupler Pipe Adapter can also be used on a Mega-Claw.
- Safe Vertical Working Load
-
1100 Pounds
- Hardware
-
1/4″ × .375 Socket Set Screw
- Weight
-
0.8 oz.
- Case Quantities
-
each